ASEMS Part 1 - Policy

The DE&S Acquisition Safety and Environmental Management System (ASEMS) comprises three parts:

  1. Part 1 Policy (this section)
  2. Part 2 Instructions, Guidance and Support
  3. Part 3 Assurance and Audit

The use of ASEMS is mandated for all DE&S projects. By applying the policy, instructions and guidance described in the three parts of ASEMS, projects will be able to demonstrate the implementation of effective and efficient safety and environmental management process which satisfy legislation and departmental policy. The aim is to ensure that all appropriate precautions are taken to prevent harm to personnel and protect the environment, consistent with providing the operational capability required by the customers of DE&S.

Sections

1. Introduction to ASEMS

Introductory Statements

2. Policy Clause Overview

List of Part 1 Policy Clauses

Clauses are grouped into logical sections, each of which can be collapsed or expanded to show or hide the sections as neccesary. Clauses can be filtered using the filtering tool below. By selecting one or more filters, only the clauses relevant to the selected filters will be displayed.

Clauses

Selecting any number of terms from the various taxonomies below will filter down the content of this page to those entities which have been classified with the specified term using the appropriate taxonomy. Once selected, the taxonomy term will be added to the Active Filters list. Selecting a taxonomy on the active filters list will disable that filter.
General Terms | Lifecycle | Responsibilities | Risk Management

1. General Clauses
These clauses represent those overarching general requirements that shall be used in all instances. If the clause is self-explanatory, there may not be explicit Instructions in ASEMS - Part 2 Instructions, Guidance and Support to support them but where these are provided, the Instructions and Guidance will provide a best practice method for compliance.

1.1

Conform to Secretary of State for Defence’s Policy

Those holding safety and environmental protection delegations shall ensure that in the procuring or supporting Products, Systems or Services, they conform to the Secretary of State’s Health, Safety and Environmental Protection Policy Statement.

1.2

Instructions

The instructions defined in ASEMS - Part 2 Instructions, Guidance and Support shall be used to manage safety and environmental impact within DE&S.

1.3

Duty Holders

Duty Holders shall be appointed and Letters of Delegation issued in accordance with the DE&S Chief Executive Officer’s Organisation and Arrangements.

1.4

Interfaces

Interfaces between organisations shall be identified so that risks across them can be appropriately managed and effectively communicated.

1.5

Data and Record Format

Data shall be maintained in a format which satisfies the reporting requirements of senior management within DE&S. Auditable records shall be made and kept under review in accordance with relevant legislation.

1.6

Significant Occurrences and Fault Reporting

All Delivery Teams shall record and report significant Product, System or Service faults, accidents, incidents and near misses to the DE&S Safety, Health & Environment Committee through the Quality, Safety and Environmental Protection Team.

1.7

Learning From Experience

Operating Centres, Delivery Teams or equivalents shall ensure accidents and incidents are investigated to identify opportunities to reduce the likelihood and impact of recurrence. Lessons learned shall be shared amongst all relevant stakeholders to maximise benefit.

1.8

Training

DE&S sponsored courses for system safety and environmental protection shall be the recognised route for achieving suitable and sufficient competence throughout DE&S.

1.9

Test Policy Clause

This is a test

2. Management Responsibilities
Management responsibilities for safety and environmental protection permeate through every Clause, and are the heart of any successful safety and environmental management system; however these Clauses confer specific requirements upon management and make compliance easier to measure.

2.1

Organisation and Arrangements

Operating Centre Directors or equivalent shall document their Organisation and Arrangements that shall communicate their commitment to Secretary of State for Defence’s policy statement, continual improvement, positive safety and environmental culture, to minimise adverse effects on the environment, and comply with legal and other appropriate requirements.

2.2

Communication

Operating Centres, Delivery Teams or equivalents shall ensure that communication procedures are implemented that provide an effective flow of safety and environmental protection information upwards, downwards and across their organisation.

2.3

Organisational Change Management

Operating Centre Directors or equivalent shall identify any increased safety risk associated with organisational change and manage it appropriately.

3. Safety and Environmental Management System
These Clauses place specific requirements upon organisations and individuals and represent the minimum requirements for a safety and environmental management system. They include the requirement to plan for safety and environmental protection, to enact that plan, check that the plan is working and to make changes where necessary to improve the system.

3.1

Safety and Environmental Management System

Operating Centres, Delivery Teams or equivalents shall operate in compliance with established Safety and Environmental Management Systems.

3.2

Safety and Environmental Management Plan

Operating Centres or equivalent shall ensure that all Products, Systems or Services have a suitable and sufficient through life safety and environmental management plan.

3.3

Stakeholder Agreements

Agreements between Stakeholders shall define and document system safety and environmental protection responsibilities.

3.4

Availability of Resources

Operating Centres, Delivery Teams or equivalents shall ensure the availability of resources necessary to establish, implement and maintain the safety and environmental management system and detail these in a through life safety and environmental management plan.

3.5

Core Element Documentation

Operating Centres, Delivery Teams or equivalents shall establish, maintain and retain suitable and sufficient information that describes the core elements of the safety and environmental management system(s), their interaction and any related documentation.

3.6

Accountability

Individuals deployed to assignments which require the formal delegation of safety and environmental responsibilities, accountabilities and authority shall be mapped against, and comply with the requirements of, the DE&S Acquisition Safety taxonomy.

3.7

Monitoring

Operating Centres, Delivery Teams or equivalents shall establish, implement and maintain a suitable and sufficient procedure to monitor and measure safety and environmental performance of their safety and environmental management system on a regular basis.

3.8

Audit Frequency

Compliance with the documented safety and environmental management system shall be verified via audit at planned intervals according to a published schedule, and as required.

3.9

Internal Audit

At planned intervals commensurate with the risk: i) Operating Centres shall audit their Delivery Teams, or equivalents, safety and environmental management systems. ii) Delivery Teams or equivalents shall audit the safety and environmental management systems of their projects. iii) The DE&S Quality, Safety and Environmental Protection Team or their representative, shall audit the safety and environmental management systems of Operating Centres and Delivery Teams.

3.10

Review

Operating Centres, Delivery Teams or equivalents shall review their safety and environmental management systems, at planned intervals commensurate with the risk, to ensure their continuing suitability, adequacy and effectiveness.

4. Safety and Environmental Cases/Assessments

These Clauses contain the requirements that each safety and environmental case/assessment shall contain. Defence Regulators may require further, additional, requirements to what is contained in these clauses. Adherence to these Clauses will ensure safety and environmental cases/assessments contain the minimum evidence necessary to support safety and environmental arguments that Products, Systems and Services are safe to use.

4.1

Safety Cases

Delivery Teams or equivalents shall establish and maintain through-life safety cases that provide a compelling, comprehensible and valid argument that a Product, System or Service is safe for a given application in a given operating environment.

4.2

Environmental Cases

Delivery Teams or equivalents shall establish and maintain through-life environmental cases that provide a compelling, comprehensible and valid argument that the environmental impact of a Product, System or Service is reduced or Best Practicable Environmental Option (BPEO) is applied.

4.3

Identification of Legislation and other Requirements

Operating Centres or equivalent shall establish and maintain a procedure for identifying and accessing the relevant safety and environmental legislative and other requirements that are applicable to their projects.

4.4

Compliance with Legislation and other Requirements

Delivery Teams or equivalents shall establish, and demonstrate compliance with, relevant legislation and other requirements.

4.5

Environmental Impact Identification

Operating Centres, Delivery Teams or equivalent shall establish, implement and maintain a procedure for the on-going proactive identification of environmental impacts.

4.6

Safety Hazard Identification

Operating Centres, Delivery Teams or equivalent shall establish, implement and maintain a procedure for the on-going proactive identification of safety hazards.

4.7

Safety and Environmental Objectives and Targets

Operating Centres, Delivery Teams or equivalents shall establish and maintain relevant safety and environmental objectives with a resourced programme to achieve targets.

4.8

Accident and Incident Records

Operating Centres, Delivery Teams or equivalent shall monitor and record accidents, incidents and near misses where the performance of their Product, Systems or Services results in harm to individuals or damage to the environment and use this information to keep their risk assessments valid.

4.9

Assessment Approval

Safety and environmental case reports shall be personally approved by the individual with formally delegated authority to confirm their acceptance with the progress of the safety case/assessment and of the risks associated with the project.

4.10

Independent Assurance

Independent review of the Safety and Environmental Management System shall be ensured, as appropriate and commensurate to the risk, by the individual with formally delegated authority for safety and environmental protection.

5. Risk Management
Risk Management is an essential function of safety and environmental protection and these Clauses reflect that importance. They set both general safety and environmental protection standards and specific DE&S requirements that support the need for assurance and performance monitoring to the Defence Board. The requirement to refer risks through Line management is included here.

5.1

Risk and Impact Assessment

All foreseeable Safety Risks and Environmental impacts shall be identified, assessed, prioritised and managed.

5.2

Change Management

Operating Centres, Delivery Teams or equivalents are to ensure that all new or increased safety risks arising from changes to Products, Systems or Services or to their operating environment are managed appropriately

5.3

Hierarchy of Controls

Operating Centres, Delivery Teams or equivalent shall adopt a recognised hierarchical approach for achieving a reduction in safety risk and environmental impact.

5.4

Consultation

Operating Centres, Delivery Teams or equivalent shall ensure that all stakeholders are identified and consulted so that their views and responsibilities are considered when managing safety and environmental risks.

5.5

Safety Risk

Products, Systems or Services shall not have safety risks that have not been formally assessed, justified and declared to be Tolerable and As Low As Reasonably Practicable (ALARP), unless communicated and accepted by a Duty Holder (DH).

5.6

Environmental Impact

A proportionate systematic approach shall be utilised to minimise negative environmental impacts and maximise positive impacts so far as is reasonably practicable.

5.7

Non-compliance Reporting

In circumstances where the ability of the Delegation Holder to achieve compliance with the requirements of ASEMS may have been compromised, Operating Centres, Delivery Teams or equivalents shall take immediate steps to correct the situation. Actions required could include improving the clarity of the authority, instructions or responsibilities provided, increasing resources or correcting deficiencies in practices or procedures. Where resolution of the problem lies outside the control of the Delegation Holder, the issue is to be referred through the line management chain. This requirement is to be applied to any further levels of delegation as necessary.

5.8

Referral Requirements

Where risks cannot be managed within an individual’s delegated responsibility, the risk shall be formally referred using the DE&S risk referral procedure.

5.9

Specialist Advice

Delivery Teams or equivalents shall ensure that all specialist advice (including guidance/ recommendations from industry and Independent Safety and Environmental Advisors (ISEAs)) is documented and is formally reviewed by the Project Safety Committee (PSC); the review outcome shall be recorded and endorsed by the individual with formally delegated authority.

5.10

Hazard Log Tool

Cassandra database system and its online equivalent eCassandra shall be the mandated Hazard Log Tool. Any Delivery Team or equivalent wishing to use an alternative Hazard Log Tool shall demonstrate that the proposed Alternative Acceptable Means of Compliance offers the same level of information/granularity so that visual representation and appropriate audit trail can be clarified and justified against the envisaged accident sequence in comparison to the mandated Cassandra/eCassandra tool.

6. Competence
It is necessary that those involved in safety and environmental protection are suitably qualified and experienced in order for them to perform their roles. These Clauses detail the way that competence is to be captured and assessed.

6.1

Roles and Responsibilities

Operating Centres, Delivery Teams or equivalents shall demonstrate that competence requirements have been established for all roles in accordance with appropriate standards including the DE&S System Safety & Environmental Protection Competence Maps, Assignment Specifications and Success Profiles.

6.2

Suitably Qualified and Experienced Personnel

Operating Centres, Delivery Teams or equivalents shall ensure that those engaged in safety and environmental protection are suitably qualified and experienced to discharge their safety and environmental responsibilities.

6.3

Competence

The competence of all staff with system safety and environmental responsibilities shall be regularly assessed, monitored and recorded. Staff with formally delegated system safety and environmental responsibilities shall demonstrate their competence to receive the delegation prior to deployment, and their competence shall be regularly monitored and recorded.

7. Test Policy Clause Section
This is a test.