3.2. Safety and Environmental Management Plan
Printer-friendly version
PDF version| System Revision ID | ASEMS Document Version | Effective From | State |
|---|---|---|---|
| 3203 | 3.0 | 09/01/2017 - 00:15 | Extant |
This clause is part of policy clause section 3 Safety and Environmental Management System. These Clauses place specific requirements upon organisations and individuals and represent the minimum requirements for a safety and environmental management system. They include the requirement to plan for safety and environmental protection, to enact that plan, check that the plan is working and to make changes where necessary to improve the system.
Clause 3.2 of the Statute Policy mandated by DE&S states;
Operating Centres or equivalent shall ensure that all Products, Systems or Services have a suitable and sufficient through life safety and environmental management plan.
- Policy Clause 3.2 Safety and Environmental Management Plan
This page links to all of the guidance and assurance that is necessary to fulfil in order to adhere to this policy.
Procedures Subject to Policy
GMP01
Contracting for Safety
This generic procedure serves to outline the process of managing contracting safety.
EMP01
Environmental Management Plan
A fully resourced plan to manage potential impacts to the environment should be developed. It is likely that aspects will be known to the Delivery Team prior to commencement of the POEMS Process. This procedure should allow the Delivery Team to budget, resource tasks that may be required to assess the significance of the impacts from the project and to demonstrate that any significant impacts are minimised or reduced, as far as reasonably practicable.
SMP01
Project Safety Initiation
This procedure describes the start-up of safety management activities on a project. It identifies safety stakeholders, and legislative and other standards that should be satisfied. The procedure also creates the key elements of the safety management organisation for the project.
SMP03
Safety Planning
This procedure guides the development of a Safety Management Plan which defines the Safety strategy, ensuring acceptable Safety performance through life.
SMP10
Safety Requirements and Contracts
This procedure provides guidance for defining the requirements of the Safety Management System (SMS), and how it will be demonstrated that safety targets have been met. The procedure also provides guidance for the development of contractual terms with external contractors where they are required.
SMP12
Safety Case and Safety Case Report
This procedure provides guidance on the development of a Safety Case and Safety Case Report. The Safety Case brings together all project safety information, forming a number of arguments which are summarised in the Safety Case Report.
SMP13
In-Service Safety Management System
This procedure provides guidance for sustaining safety performance by ensuring in-service arrangements are recognised and operated.
Audit Question Set
Audit Question Set Section 3.2 Safety and Environmental Management Plan
The Audit Question Set used as assurance in order to adhere to the policy described in policy clause 3.2.
3.2
